Home Page About Me Contact My Sound System Services Photo Album Work Examples


Crown XTi 1000
(Quantity 8)

  • On-board DSP can control EQ, delay, Y-input, sub synth, and xover points
  • 275W @ 8Ω
  • 700W @ 2Ω
  • 1400W @ 4Ω bridged
  • 100dB signal to noise
  • 30.5dB voltage gain
  • 6.8A, 120VAC
  • 18.5lb
 

QSC RMX2450
(Quantity 1)

  • 500W @ 8Ω
  • 750W @ 4Ω
  • 1200W @ 2Ω
  • 1500W @ 8Ω bridged
  • 2400W @ 4Ω bridged
  • 100dB signal to noise
  • 34dB voltage gain
  • 7A, 120VAC
  • 44.5lb

QSC RMX1450
(Quantity 1)

  • 280W @ 8Ω
  • 450W @ 4Ω
  • 700W @ 2Ω
  • 900W @ 8Ω bridged
  • 1400W @ 4Ω bridged
  • 100dB signal to noise
  • 32dB voltage gain
  • 6A, 120VAC
  • 40lb

QSC RMX850
(Quantity 1)

  • 200W @ 8Ω
  • 300W @ 4Ω
  • 430W @ 2Ω
  • 600W @ 8Ω bridged
  • 830W @ 4Ω bridged
  • 100dB signal to noise
  • 30dB voltage gain
  • 5A, 120VAC
  • 35lb
xTi_racks.jpg These are my main amplifier racks. Each 6-space case contains two Crown xTi1000 and two Meyer M-1A loudspeaker processors. I also have an ATA case that fits 7 amplifiers. In total, I can power a stereo system with two subwoofers and 8 monitor mixes.
XTiManual.pdf  [4.35Mb]

©2008